Breaking News:
Programat EP 3010/G2 110-120V/50-60Hz -- " The Programat G2 Furnaces have a modern design, intuitive operation and a ..." -- 17 April 2022
Programat EP 5010/G2 110-120V/50-60Hz -- " The Programat G2 Furnaces have a modern design, intuitive operation and a high ..." -- 17 April 2022
Programat P510/G2 110-120V/50-60Hz -- " The Programat G2 Furnaces have a modern design, intuitive operation and a high ..." -- 17 April 2022
Programat P710 -- " The Programat® P710 leads ceramic furnaces into the future with its unique cutting ..." -- 05 October 2015
Programat P710/G2 110-120V/50-60Hz -- "   The Programat G2 Furnaces have a modern design, intuitive operation and a ..." -- 17 April 2022
The Programat G2 Furnaces have a modern design, »
The Programat G2 Furnaces have a modern design, »
  The Programat G2 Furnaces have a modern »
The Programat G2 Furnaces have a modern design, »
The Programat® P710 leads ceramic furnaces into the »

AL-Sawari Brands

2805724
Today
Yesterday
This Week
Last Week
This Month
Last Month
All days
634
2180
6995
2453614
10000
26632
2805724
Your IP: 172.71.254.156
2025-01-11 13:54

free counters

Silicones

Duplicating silicones

Adisil® blue 9 : 1
REF:101003

Addition-curing duplicating silicone for the highest standards.
The leading duplicating silicone for the patented flask-less SILADENT system for over 15 years (adhesive tape technique).

 
  • Highly accurate reproduction to within 1/1000 mm
  • No shrinkage
  • No deterioration
  • Excellent tensile strength and tear resistance properties and values
  • Virtually no limit to the number of times the duplicating mould can be poured
Adisil® transparent 1 : 1
REF:101100

Transparent addition-curing duplicating silicone. Mixing ratio 1 : 1.
The physical properties of the earlier product have been improved and the newly developed product is now available.
 
  • Suitable for duplicating single dies and also for the SILADENT duplicating system
  • Light-curing composites with a wavelength between 300 and 500 nanometers may be polymerized through the silicone
  • Specific uses in prosthetics
  • Not suitable for use with dispensers
Adisil® pink 1 : 1
REF:101202

A high-quality addition-curing duplicating silicone with all the prerequisites for the adhesive tape and flasking techniques.
 
  • Easy and economical measuring
  • Suitable for dispensers
  • Ideal low viscosity
Adisil® rapid 1 : 1
REF:101232

A rapid-curing, addition-curing duplicating silicone, developed especially for express jobs using adhesive crepe sleeves or flaks. Remove Adisil® rapid from the duplicating mould after just 10 minutes.
 
  • removable from the duplicatingmould after 10 minutes
  • suitable for use with dispensingunits
  • tear/tear growth resistant
  • low-viscosity
Dubliersilikon - Kontursil 1 : 1
REF:101402

Addition-curing duplicating silicone. Recommended for use in when duplicating with conventional flasks.
 
  • High reproduction of detail graphic accuracy
  • Provides for easy model removal due to greater flexibility
  • May be mixed with a dispenser
Marmogel
REF:200440

Duplication gel, green

An elastic duplication material for use with gypsum models, gypsum and phosphate bound investments. Marmogel is a reversible hydrocolloid manufactured from high quality, natural ingredients and stabilizing substances.

Surfactants, Debubblizers

Neutralit
REF:101601

A universal liquid for neutralising and wetting silicone, 
wax, metal and plastic surfaces. Neutralit does not form 
a film and is compatible with all silicone-based impression 
and duplicating materials. 

Not suitable for alginates, 
hydrocolloids and polyethers!
Neutrasil
REF:101603

A special alcohol-based liquid for reducing the surface 
tension of silicone. Neutrasil enhances the flow properties 
of the investment and facilitates the fabrication of perfect 
duplicating models.

Not suitable for alginates, hydrocolloids 
and polyethers!
Gipsil
REF:101605

Surfactant based debubblizer specially for pouring bubble-free 
gypsum models in silicone and polyether impressions.

 

Dispensing pump comp. B
REF:101502

Made of plastic for the 6 kg container. Pump with lid. 

Warning: Never interchange the lids of the two components.
Danger of component solidification!
Dispensing pump comp. A
REF:101512

Made of plastic for the 6 kg container. Pump with lid. 

Warning: Never interchange the lids of the two components.
Danger of component solidification!
Fixation device
REF:101701

Device for positioning the stabilizer when using the SILADENT 
flaskless duplicating procedure.
Duplicating cross
REF:101702

Device for flaskless duplication without the fixation device. 
A practical accessory when the duplicating material is to be 
vulcanised cured under pressure.
Stabilizer, white
REF:101703

For stabilizing the silicone mould when using the SILADENT-
flaskless duplicating procedure. (Patent no. DBP 36 44 997)
Adhesive duplicating tape
REF:101707

Duplicating ring material for the patented flaskless SILADENT duplicating procedure. (Patent no. DBP 36 00 736)
Adhesive duplicating tape
REF:101708

with space-maintaining adhesive surface.

Adhesive tape with a thicker adhesive strip to allow for more 
space between the model and duplicating silicone 
Economical duplicating flasks, blue, size 1
REF:101709

Flask complete

Plastic duplicating flask with 3 sections for cost saving, problem-
free duplicating with Kontursil. Consists of a flask base, flask ring 
and stabilizer. 

Supplied in two sizes:
Size 1: 68 x 55 mm, Size 2: 73 x 61 mm
Flask base single, size 1
REF:101710

 Flask base single, size 1 (68 x 81 mm) 
Flask ring single, blue, size 1
REF:101711

Flask ring single, blue, size 1(68 x 81 mm) 
Stabilizer with retention retainers, single, size 1
REF:101712

Stabilizer with retention retainers, single, size 1(68 x 55 mm) 
Economical duplicating flasks, blue, size 2
REF:101713

Flask complete

Plastic duplicating flask with 3 sections for cost saving, problem-
free duplicating with Kontursil. Consists of a flask base, flask ring 
and stabilizer. 

Supplied in two sizes:
Size 1: 68 x 55 mm, Size 2: 73 x 61 mm
Flask base single, size 2
REF:101714

Flask base single, size 2(73 x 91 mm) 
Flask ring single, blue, size 2
REF:101715

Flask ring single, blue, size 2(73 x 91 mm) 
Stabilizer with retention retainers, single, size 2

 

 

 

  • Prev
  • Our Valued Partners
al dente
BIOMET 3i
Ivoclar
Kulzer
Neoss
NTI
Ortho Technology
R&S
Renfert
Siladent
TrollDental
Scroll to top